HomeAudiopipeAudioDriftBazookaCDT AudioClarionInfinityJBLJVCKenwoodPioneerRockford FosgateFarenheit Mobile Multimedia Source UnitsFirebird and Camaro Speaker PackageInstallation ProductsInterface ProductsDynamatEnclosures and Amp RacksSpecial DealsPayment and ShippingContact UsGallery/ Customer VehiclesFriends of Kee Audio

Infinitylogo.gif

Infinity Amplifiers

 

INFINITY REF1300A

 300 Watt Monoblock Reference Series Amplifier

REF1300A.jpg

PRICE: $178.00
Number of Channels : 1-Channel
Maximum Power : 342 Watts
RMS Power Output @ 4 Ohms : 200 Watts x 1-Channel
RMS Power Output @ 2 Ohms : 300 Watts x 1-Channel
Bridged Power : N/A
THD : 1%
Signal-to-Noise Ratio (dB) : 85dB
Frequency Response (Hz) : 11Hz~330kHz
High-Pass Crossover Frequency : N/A
Low-Pass Crossover Frequency : 32Hz~320Hz
Bass Boost : 0dB~6dB
Bass Remote : Yes
Fuse Rating : 20A x 3
Dimensions (Width x Height x Length) Inches : 9" x 2-11/16" x 14-3/16"
Approximate Weight : 12.9 LBS
 

INFINITY REF475A

Reference Series 300 Watt 4-channel Amplifier

InfinityREF475A.jpg

PRICE: $199.00
Number of Channels : 4-Channel
High-Output PWM MOSFET Power Supply
Variable Bass Boost Circuit
Full Range Preamp Outputs
RMS Power Output @ 4 Ohms : 75 Watts x 4-Channel
RMS Power Output @ 2 Ohms : 90 Watts x 4-Channel
Bridged Power : N/A
THD : 1%
Signal-to-Noise Ratio (dB) : 85dB
Frequency Response (Hz) : 10Hz~100kHz
Built-in Crossover : Yes
High-Pass Crossover Frequency : 32Hz~320Hz
Low-Pass Crossover Frequency : 32Hz~320Hz
Bass Boost : 0dB~6dB
Bass Remote : N/A
Fan Cooled : N/A
Fuse Rating : 2 x 35A
Dimensions (Width x Height x Length) Inches : 9" x 2-11/16" x 14-3/16"
Approximate Weight : 13.5 LBS

INFINITY REF5350A

5-Channel 350W-RMS Reference Series Amplifier

InfinityREF5350A.jpg

PRICE: $279.00
Number of Channels : 5-Channels
Maximum Power : 89 Watts x 4-Channel + 332 Watts x 1-Channel
RMS Power Output @ 4 Ohms : 50 Watts x 4-Channel + 150 Watts x 1-Channel
RMS Power Output @ 2 Ohms : 60 Watts x 4-Channel + 300 Watts x 1-Channel
Signal-to-Noise Ratio 85dBA (reference 1 watt at 4 ohms)
Dynamic Power 89 watts (channels 1,2,3,4); 332 watts (channels 5) at 2 ohms
Effective Damping Factor 6.3 at 4 ohms
Frequency Response (-3dB) 10Hz to 100kHz (channels 1,2,3,4) 10Hz to 302Hz (channels 5)
Maximum Input Signal 6V
Maximum Sensitivity 100mV
THD : 1%
Signal-to-Noise Ratio (dB) : 85dB
Frequency Response (Hz) : 10Hz~100kHz
Built-in Crossover : Yes
High-Pass Crossover Frequency :
Low-Pass Crossover Frequency : 20Hz~200Hz
Bass Boost : 0dB~6dB
Bass Remote : Yes
Fan Cooled : N/A
Fuse Rating : 40A x 2
Dimensions (Width x Height x Length) Inches : 9" x 2-11/16" x 16-9/16"
Approximate Weight : 15.9 LBS
Warranty Information : 1 Year Warranty

Infinity KAPPA ONE

1600 Watt Kappa Series Class D Monoblock Subwoofer Amplifier

KAPPAONE.jpg

PRICE: $309.00
Kappa Series Class D Mono Subwoofer Amplifier
RMS Power Rating:
4 ohms: 500 watts x 1 chan.
2 ohms: 800 watts x 1 chan.
Max power output: 1600 watts
MOSFET power supply
3 LED indicators (2 power, 1 protect)
Bass Boost (0-12 dB)
DirectFET transistors increase power output and overall efficiency
Non-Stop Thermal Protection (The amplifier will gradually reduce output to cool the amplifier down instead of shutting it off if it overheats)
Dynamic Bass Optimization (DBO): Fine-tune the bass in your system to optimize performance. The frequency control also acts as a subsonic filter
Protection Circuitry (DC output, over/under voltage, short circuit)
Heavy duty aluminum alloy heatsink for supreme heat dissipation
Preamp RCA outputs
1 Channel operation
RCA level inputs
Screw terminals
Variable high-pass filter (10-80 Hz, 12 dB/octave)
Variable low-pass filter (32-320 Hz, 12 dB/octave)
Subsonic Filter (24 dB at 15 Hz)
CEA-2006 compliant amplifier
Frequency response: 20-320 Hz
Dimensions: 13"L x 7-1/16W x 1-3/4H
4-gauge power and ground wiring is required for installation

INFINITY KAPPA FIVE

1200W Kappa Series 5-Channel Amplifier

InfinityKAPPA5.jpg

PRICE: $339.00
Kappa Series 5-Channel Class D Car Amplifier
RMS Power Rating:
4 ohms: 50 watts x 4 chan. + 200 watts x 1 chan.
2 ohms: 75 watts x 4 chan. + 300 watts x 1 chan.
Bridged, 4 ohms: 150 watts x 2 chan. + 200 watts x 1 chan.
Max power output: 1200 watts
MOSFET power supply
DirectFET technology transistors
3 LED indicators (2 power, 1 protect)
Bass Boost (0-12 dB bass boost)
5/4/3 Channel operation
Dynamic Bass Optimization (DBO): Fine-tune the bass in your system to optimize performance. The frequency control also acts as a subsonic filter
Protection Circuitry (DC output, over/under voltage, short circuit)
Non-Stop Thermal Protection (The amplifier will gradually reduce output to cool the amplifier down instead of shutting it off if it overheats)
Variable high-pass filter (32-320 Hz, 12 dB/octave)
Variable low-pass filter (32-320 Hz, 12 dB/octave)
CEA-2006 compliant amplifier
Frequency response(Full Range): 10-75,000 Hz
Frequency response(Subwoofer): 20-320 Hz
Dimensions: 14-3/16"L x 7-1/16"W x 1-3/4"H
4-gauge power and ground wiring is required for installation

Infinity KAPPA FOUR

1200W Max Kappa Series 4-Channel Amplifier

InfinityKAPPA4.jpg

PRICE: $329.00
Infinity KAPPA 4-Channel Class D Car Amplifier
RMS Power Rating:
4 ohms: 125 watts x 4 chan.
2 ohms: 150 watts x 4 chan.
Bridged, 4 ohms: 300 watts x 2 chan.
Max power output: 300 watts x 4 chan.
DirectFET transistors for increased power output
Remote bass level input (remote level control sold separately
LED power indicators for DC output, over/under voltage, and Short circuit protection
Tuned Bass EQ (0-12 dB bass boost at 50 Hz)
High-power class D circuit topology
4/3/2 Channel operation
Speaker-level inputs
3-Way Smart System Protection
Heavy duty heatsink for extreme heat dissipation
RCA level inputs
Screw terminals
Variable high-pass filter (32-320 Hz, 12 dB/octave)
Variable low-pass filter (32-320 Hz, 12 dB/octave)
Frequency response: 10-75,000 Hz
Dimensions: 13"D x 7-1/16"W x 1-3/4"H
4-gauge power and ground wiring is required for installation