Monoblock Amplifiers


MTX Jack Hammer Amplifiers

 

MTX JH300 Class-D

MTXJH600.jpg

PRICE: $179.00
Class-D mono subwoofer amplifier
200 watts RMS x 1 at 4 ohms (300 watts RMS x 1 at 2 ohms)
frequency response: 20-200 Hz
variable low-pass filter (40-5,000 Hz, 24 dB/octave)
variable subsonic filter (20-50 Hz, 12 db/octave)
bass boost (12 dB at 40 Hz)
Active Fan Cooling with automatic variable fan speed
Smart Engage turns on amp when signal arrives through the speaker-level inputs
preamp inputs
fuse rating: 35A x 1
12-1/8"W x 2-3/8"H x 8"D
warranty: 1 year

 

MTX JH600 Class-D 

MTXJH600.jpg

PRICE:$279.00
Class-D mono subwoofer amplifier
350 watts RMS x 1 at 4 ohms (600 watts RMS x 1 at 2 ohms)
frequency response: 20-200 Hz
variable low-pass filter (40-200 Hz, 24 dB/octave)
variable subsonic filter (20-50 Hz, 12 db/octave)
bass boost (12 dB at 40 Hz)
Active Fan Cooling with automatic variable fan speed
Smart Engage turns on amp when signal arrives through the speaker-level inputs
CEA-2006 compliant
fuse rating: 25A x 3
14-11/16"W x 2-3/8"H x 8"D
warranty: 1 year

Crunch PZI-1000.1

PZONEAMP.jpg

PRICE: $139.00 
1 Channel operation
1ohm stable
RMS Power @ 1 Ohm: 1000W x 1
RMS Power @ 2 Ohm: 500W x 1
RMS Power @ 4 Ohm: 250W x 1
Mono-Block A/B class amplifier topography
MOSFET outputs
Illuminated Crunch logo
PWM digital power supply
Fully adjustable crossovers, Hi-Pass and Low-Pass
Silver RCA line inputs & outputs - permit amplifier daisy-chaining
Silver power connections

 

DB DRIVE SPA1250.1

speed_amplifiers.jpg

PRICE: $185.00
1250watts RMS @ 1ohm
625watts RMS @ 2ohms
Class AB circuitry
Audiophile-grade components
Drivesink Technology
On-board low pass crossover
Bass Boost 18db @ 45hz
Lowpass Crossover 60hz - 150hz
Continuously variable 12dB bass boost equalizer
Continuously variable 12dB per octave low-pass crossover
Direct connect integrated speaker and power wire terminals
DC-DC PWM power supply
Bipolar outputs
Buffered pre-amp input circuitry
Remote bass knob

DB Drive SPA1000.1

speed_amplifiers.jpg

Price: $167.99
Power Output:
1000watts RMS @ 1ohm
500watts RMS @ 2ohm
250watts RMS @ 4ohm
Tri-Mode capability
Variable 12dB bass boost
12db per octave lowpass crossover
Direct connect speaker and power wire terminals
Bipolar outputs
Buffered preamp input circuitry
Drivesink heat management system
Bass remote knob

 

Hifonics BXi608 Class-A/B Subwoofer Amp

Hifonicsbxi608.jpg

PRICE: $189.00
1 x 150watts RMS @ 4ohms
1 x 300watts RMS @ 2ohms
1 x 600watts RMS @ 1ohm
Super A/B class amplifier topography
Ultra-Fi MOSFET outputs
Illuminated Hifonics logo 
Fully adjustable Accu Cross crossovers include: -24dB low pass crossover
Remote bass control included
Balanced line inputs with optional Hifonics MM-BLD1
Gold RCA line outputs - permit amplifier Daisy-Chaining
4 Guage power connections
Dimensions (W/H/D): 9.84" x 9.45" x 2.4"

Cadence FXA-1500

fxa1500_896_detail.jpg

Price: $219.00
Mono Power Output:
500Watts RMS x 1 @ 2 Ohm
300Watts RMS x 1 @ 4 Ohm   
Frequency Response: 20Hz - 300Hz
S/N Ratio: >100 db, Minimum THD: <0.05%
High Level OEM Input
Bass Boost Equalization

Powerbass ASA 1000.1

asa_1000.jpg

Price: $269.00
Mono Power Output:
1000W x 1 RMS @ 1 ohm 
500W x 1 RMS @ 2 ohm 
250W x 1 RMS @ 4 ohm
Total Harmonic Distortion : <0.5%,
Frequency Response : 20Hz - 250Hz
High-Pass Crossover Freq : 40Hz - 250Hz
Subwoofer EQ Frequency : 40Hz

 

Phoenix Gold PG RSD300.1

PGRSD300.1.jpg

PRICE: $239.00
200W x 3 Ohms (1kHz and 1%THD+N)
310W x 2 Ohms (1kHz and 1%THD+N)
CEA Rated Specifications :
180W x 1 (RMS @ 4 Ohms and 1%THD+N)
300W x 1 (RMS @ 2 Ohms and 1%THD+N)
Signal to Noise Ratio: 84dBA - 1W Output @ 4 Ohms
Frequency Response: 10Hz - 300Hz
Effective Damping Factor: 6.39 @ 4 Ohm
Maximum Input: 11.8V @ Clipping
Maximum Sensitivity: 226mV @ Clipping
Dimensions: 12 7⁄8 x 11 3⁄16 x 2 3⁄8 inch