|
|
Multi-Channel Amplifiers
2-Channel Amplifiers
|
MA Audio Hard Kore Series HK302 Amplifier

|
|
PRICE: $219.00 HK Series 2-Channel Class AB Car Amplifier RMS
Power Rating: 4 ohms: 150 watts x 2 chan. 2 ohms: 200 watts x 2 chan. 1 ohm: 300 watts x 2 chan. Bridged,
2 ohms: 600 watts x 1 chan. Max power output: 1200 watts x 1 chan. MOSFET power supply LED power and protection
indicators Tuned Bass EQ (0-18 dB bass boost) Digital voltage monitor display Bridgeable operation 1
Ohm stable Variable high-pass filter (40-250 Hz, 24 dB/octave) Variable low-pass filter (40-250 Hz, 24 dB/octave)
|
|
|
MA Audio Hard Kore Series HK402

|
|
PRICE:$229.00 HK Series 2-Channel Class AB Car Amplifier RMS
Power Rating: 4 ohms: 200 watts x 2 chan. 2 ohms: 300 watts x 2 chan. 1 ohm: 400 watts x 2 chan. Bridged,
2 ohms: 800 watts x 1 chan. Max power output: 1600 watts x 1 chan. MOSFET power supply LED power and protection
indicators Tuned Bass EQ (0-18 dB bass boost) Digital voltage monitor display Bridgeable operation 1
Ohm stable Variable high-pass filter (40-250 Hz, 24 dB/octave) Variable low-pass filter (40-250 Hz, 24 dB/octave)
Frequency response: 20-20000 Hz Dimensions: 12.4"L x 10.6"W x 2.7"H |
|
|
|
PRICE: $349.00 HK Series
2-Channel Class AB Car Amplifier 4 ohms: 300 watts RMS x 2 chan. 2 ohms: 400 watts RMS x 2 chan. 1 ohm:
600 watts RMS x 2 chan. Bridged, 2 ohms: 1200 watts RMS x 1 chan. Max power output: 2400 watts x 1 chan. MOSFET
power supply Tuned Bass EQ (0-18 dB bass boost) Digital voltage monitor display Bridgeable operation 1 Ohm stable Preamp RCA outputs Thermal, short circuit, overload protection circuitry Quiet fan cooling
system Variable high-pass filter (40-250 Hz, 24 dB/octave) Variable low-pass filter (40-250 Hz, 24 dB/octave)
Frequency response: 20-20000 Hz Dimensions: 12.4"L x 13"W x 2.7"H
|
|
|
|
MTX Jack Hammer JH202

|
|
PRICE: $149.00 2-channel car amplifier 50 watts RMS x 2 at 4 ohms (100 watts RMS
x 2 at 2 ohms) 200 watts RMS x 1 bridged (4-ohm stable in bridged mode) frequency response: 20-200 Hz selectable
high-pass filter (85 Hz, 12 dB/octave) selectable low-pass filter (85 Hz, 18 dB/octave) Active Fan Cooling with
automatic variable fan speed Smart Engage turns on amp when signal arrives through the speaker-level inputs CEA-2006
compliant preamp inputs fuse rating: 30A x 1 12-1/8"W x 2 3/8"H x 8"D
|
|
|

|
|
PRICE:$99.00 75w x 2 @ 4 ohm power 150w x 2 @ 2 ohm power 300w x 1 @ 4 ohm mono power 600 watts peak power 2-ohm stereo/4-ohm mono stable mosfet power supply variable
12db, high/low pass electronic crossover variable bass boostoptional remote gain control
|
|

|
|
PRICE: $149.00 1200 watts Max, Class A/B 2-Channel Amplifier 4 ohms: 150 watts RMS x 2 chan. 2 ohms: 300 watts RMS x 2 chan. 4 ohms Bridged: 600 watts RMS x 1 chan. MOSFET Power Supply Low Profile Aluminum Finned Heatsink Variable High Pass and Low Pass Crossover 12
dB per Octave Crossover Slope Frequency Response: 20 - 22,000 Hz 0 - 18 dB Bass Boost Self Diagnostic Protection
Circuit, LED indicates Impedance Overload, Speaker Short Circuit, Thermal Overheating, and DC Output Variable Gain Control
Optional Remote Gain Control Low Level Line Inputs and Outputs Dimensions: 13.7"L x 9.3"W x 1.9"H
|
|
|
CDT SQA-4100

|
|
PRICE: $499.00 4 Ohm - 110W x 4CH 2
Ohm - 160W X4CH Mono Bridge at 4 Ohms - 320W x 2CH Frequency response-3dB - 5Hz - 60kHz S/N Ratio(A-Weight)
- _100dB Channel Separation - _65dB Variable Input Gain Control - 0.15V~5.0V Input Impedance - 47 k? Crossover
S/W - LP/FULL/HP Variable Hi-Pass (12dB) - 30Hz~500Hz Variable Low-Pass (12dB) - 30Hz~500Hz Variable Subsonic
Filter (12dB)- 15Hz~45Hz |
Hifonics ZXi4408

|
|
PRICE: $171.00 RMS Power @ 4-Ohm: 55W x 4 RMS Power @ 2-Ohm: 110W
x 4 RMS Power @ 4-Ohm: 220W x 2 Bridgeable A/B-Class amplifier topography 3-Channel mode (L & R + Subwoofer)
Ultra-Fi MOSFET outputs Illuminated Hifonics logo PWM MOSFET EXVP SPC twin turbo torroids with Simpatico
coil design Fully adjustable Accu Cross crossovers include: 24dB low pass crossover, 12dB high pass crossover Bass boost:
10dB variable bass equalization RCA line outputs - permit amplifier Daisy-Chaining 4 Guage power connections Dimensions
(W/H/D): 12.6" x 9.45" x 2.4" |
|
|
Hifonics TXi6404

|
|
PRICE: $159.00 4/3/2 Channel TXi Series Amplifier Class A/B Amplifier 85W
RMS x 4 chan. @ 4 Ohms 170W RMS x 4 chan. @ 2 Ohms 340W RMS x 2 chan. @ 4 Ohms Bridged 2 or 3 or 4 Channel
Operation Soft Turn On Frequency Response: 10 Hz - 30 kHz Variable Input Gain Control Thermal / DC-Offset,
Short, Overload Diagnostic LEDs Full MOSFET PWM Power Supply LP/BP/Full/HP Crossover Selections Subsonic
Filters Variable High Pass: 10 Hz - 1.2 kHz Variable Low Pass: 50 Hz - 150 Hz Bass Boost @ 45 Hz 0 - 18
dB RCA Line Out Illuminated Badge and Heat Sink Power Terminals, Up To 4 Ga Speaker Terminals, Up
To 12 Ga Dimensions: 16-1/4"L x 10"W x 2"H
|
|
MA Audio HK404

|
|
PRICE: $329.00 4 ohms: 200 watts RMS x 4 chan. 2 ohms: 400
watts RMS x 4 chan. Bridged, 4 ohms: 800 watts x 2 chan. Max power output: 1600 watts x 2 chan. MOSFET power
supply LED power and protection indicators Tuned Bass EQ (0-18 dB bass boost) Digital voltage monitor display
Bridgeable operation Thermal, short circuit, overload protection circuitry Quiet fan cooling system Gold-plated RCA level inputs Gold-plated screw terminals Variable high-pass filter (40-250 Hz, 24 dB/octave)
Variable low-pass filter (40-250 Hz, 24 dB/octave) Frequency response: 20-20000 Hz Dimensions: 12.4"L
x 13.7"W x 2.7"H |
|
|
MTX X Thunder 704X
|
|
PRICE: $219.00 4-channel car amplifier 70 watts RMS x 4 at
4 ohms (105 watts x 4 at 2 ohms) 210 watts RMS x 2 bridged at 4 ohms CEA-2006 compliant variable high-pass
filter (40-8,000 Hz at 12 dB per octave) low-pass filter (40-5,000 Hz at 24 dB per octave) speaker- and preamp-level
inputs fuse rating: 30A x 2 4-gauge power and ground leads recommended 14-15/16"W x 2-1/4"H x 9-5/8"D |
5-Channel Amplifiers Run your entire system, front speakers, rear speakers and subs from one amplifier. Like having 2 amps
in one!!
MTX Jack Hammer Series JH805

|
|
PRICE: $439.00 37.5 watts RMS x 4 at 4 ohms + 250 watts RMS
x 1 at 4 ohms 75 watts RMS x 4 at 2 ohms + 500 watts RMS x 1 at 2 ohms 150 watts RMS x 2 bridged at 4 ohms + 250
watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms) frequency response: 20-200 Hz variable front high pass filter
(40-5,000 Hz, 12 db/octave) variable rear high-pass (40-8,000 Hz, 12 dB/octave) and low-pass filter (40-5,000 Hz, 12
dB/octave) variable subsonic filter (40-200 Hz, 12 db/octave) bass boost (12 dB at 40 Hz) Active Fan Cooling
with automatic variable fan speed Smart Engage turns on amp through the speaker-level inputs CEA-2006 compliant fuse rating: 30A x 3 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier 17-3/8"W x 2-3/8"H x 8"D
|

|
|
PRICE: $254.00 4 ohms: 55 watts x 4 chan. + 200 watts x 1
chan. 2 ohms: 110 watts x 4 chan. + 300 watts x 1 chan. Bridged, 4 ohms: 220 watts x 2 chan. + 200 watts x 1 chan.
Tuned Bass EQ (0-10 dB bass boost at 45 Hz) 5/4/2 Channel operation Chrome-plated RCA level inputs Chrome-plated
screw terminals Variable high-pass filter (50-4000 Hz, 24 dB/octave) Variable low-pass filter (250-4000 Hz, 24
dB/octave) Channel 5 variable low-pass filter (30-150 Hz, 24 dB/octave) Frequency response: 10-30000 Hz |
|
Cadence FXA-5100

|
|
PRICE: $239.00 4 Ohm RMS Power: 4 x 100 Watts @ 13.8 Volts 2
Ohm RMS Power: 4 x 150 Watts @ 13.8 Volts + 4 Ohm Mono RMS Power: 1 x 300 Watts @ 13.8 Volts 2 Ohm Mono RMS
Power: 1 x 400 Watts @ 13.8 Volts Frequency Response: 20Hz - 30kHz S/N Ratio: >100 db Damping Factor: >200
@ 100Hz Minimum THD: <0.05% Input Voltage: 200 mV - 8 Volts High Level OEM Input Lucite Encapulated
Terminals Includes Dashboard Bass Remote Control Dimensions: 18" x 11" x 2.75" |
|
|
|
|